ISE 2.3 for TACACS

This is just a quick post on how to get TACACS working in 2.3; using AD in this example.  For this, we will follow the guide provided here and supplement it below:

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200208-Configure-ISE-2-0-IOS-TACACS-Authentic.html

But for Configuring TACACS Authorization Policy, I am going to provide some screenshots in order.

Step 1

Step 2
Step 3

                        










Step 4

Comments

Post a Comment

Popular posts from this blog

Policy Based Routing on a Nexus

First of all, let's just admit, I am a collab guy, doing work on a Nexus is a foreign experience. While some things are intuitive not everything follows RFC's and the Nexus platform is a bit more restrictive. First of all, to get PBR going, I had to change the hardware profile, since I have no intention of using QoS internally in my lab, I decided to steal from it: hardware profile tcam region qos 0 hardware profile tcam region pbr 256 This then requires a reboot.  After this is done and the pbr feature is enabled: feature pbr You can get into creating the route-maps.  However, unlike IOS devices you can only use permits in your acl's and then use a deny statement on the route map itself: ip access-list PBR_DENY statistics per-entry 10 permit ip any 192.168.1.0/24 ip access-list PBR_PERMIT  statistics per-entry  10 permit ip any any route-map PBR_RULE pbr-statistics route-map PBR_RULE deny 10  match ip address PBR_DENY route-map PBR_RULE permit 2
Read more

Adding 2 Factor Authentication to Guacamole through Duo and Yubikey

In order to do this you will need to grab the current duo extension as such: wget  https://gigenet.dl.sourceforge.net/project/guacamole/current/extensions/guacamole-auth-duo-0.9.13-incubating.tar.gz Once downloaded, decompress and move it to the appropriate folder: tar xzf guacamole-auth-duo-0.9.13-incubating.tar.gz && mkdir /etc/guacamole/extensions && mv ./guacamole-auth-duo-0.9.13-incubating/guacamole-auth-duo-0.9.13-incubating.jar /etc/guacamole/extensions/ Now add the Guacamole as an application to your Duo management page.  Select, Protect an Application under the Applications menu, then you will select the Web SDK application, rename it something like Guacamole. Next you will need to edit your /etc/guacamole/guacamole.properties and add the following info to it from the Duo site (minus the last key): duo-api-hostname: <Your API key found on the Duo site> duo-integration-key: <Integration key found on the Duo site> duo-secret-key: <
Read more